| Backplane
Specifications |
- One 2 link system with rear I/O
- One x16 type 1 perifperal slot with rear I/O
- Two x4 type 1 peripheral slots with rear I/O
- Three x4 type 2 peripheral slots with rear I/O
- One switch
slot as defined in PICMG EXP.0
- One Hybrid Bridge Board to allow bridging the CPCIe backplane segment to the legacy backplane segment
- Four 32-bit/33MHz
legacy slots with rear I/O
- 1 SATA or 1 SAS hard drive connection
- USB thin floppy disk drive connection
- 2 3U power supply connections
|
Hybrid Bridge board (HYB) Specifications
|
|
| Form Factor |
3U or 6U CompactPCI Express, PICMG EXP.0, Single Slot |
| Slot Type |
PICMG EXP.0 bussed hybrid slot |
| Bridge |
PLX PEX 8114 |
| Front Panel Indicators |
Bank of 4 PCIe lane active indicators (green) |
| Power consumption |
3.3V @ 2A |
| Temperature Range |
0° to 55°C (32° to 122°F) |
| Switch board (SW) Specifications |
|
| Form Factor |
3U CompactPCI Express, PICMG EXP.0, single slot |
| Slot Type |
PICMG EXP.0 switch slot |
| Power Consumption |
3.3V @ 2A |
| Front Panel Indicators |
Bank of 8 PCIe link-active indicators (green) |
| Temperature Range |
0° to 55°C (32° to 122°F) |
| Power Supply Specifications |
|
| AC Input |
90-264 Vac continuous
range, 47 to 63 Hz |
| Cooling |
15 cfm, 225 lfm airflow
required for cooling |
| Thermal Protection |
Shuts down power supply
if overheated, Automatic recovery |
| Temperature
Range |
0 to 40
degrees centigrade at full ratings |
| MTBF |
421,408 hours |
| Safety
Agency Approvals |
Models
are approved to UL1950; CSA 22.2 #234 |
Servers
Embedded Products
