| Processor |
1.4 GHz Intel® Pentium® M processor Low Voltage 738
using a mFC-BGA 479 (micro Flip-Chip Ball Grid Array) package |
| Form Factor |
3U CPCIform factor x 4HP wide |
| Hard Disk Interfaces |
EIDE interfaces:
- supports up to Ultra-DMA 100 for high performance drives
- single slot board supports on-board type I or type II CompactFlash site (not available on dual slot variants)
- optional second slot boards supports type I or type II CompactFlash site, 2.5 inch disk drive and EIDE header for external drives
- 2 interfaces available simultaneously
- 2 x Serial ATA150 interfaces:-
- two channels accessible via J2
- transfer rate up to 150 Mbytes/s
|
| Stereo Audio |
- AC '97 interface via J2
- independent legacy speaker output via J2
- codec on rear transition module
|
| Graphics Interface |
Implemented by the Intel® 855GME GMCH:
- resolutions up to 2048 x 1536 @75Hz on analog interface
- resolutions up to 1400 x 1050 @ 60Hz on DVI-D interface
- up to 16M colors
- analog interface accessed via a 15-way VGA connector on front panel
- DVI-D interface accessed via J2
|
| Serial Interfaces |
4 x serial channels:
- 1 x RS232 and 1 x RS232/422/485 channels accessible via front panel on optional second slot board
- 2 x serial channels (TTL) accessible via J2
- 16550 compatible UARTs
- supporting RI, CTS, RTS, DSR, DTR and DCD
|
| Flash Eprom |
- 1 Mbyte of BIOS Flash EPROM
- Application storage available on CompactFlash card
|
| Firmware Support |
- Phoenix™ BIOS
- comprehensive Power-On Self-Test (POST)
- LAN boot firmware included
|
| Software Support |
Supports Windows® 2000, Windows® XP, Windows® XP Embedded, QNX®, Linux® and VxWorks® |
| Other Peripheral Interfaces |
- PC-compatible Real Time Clock (Year 2000 compliant)
- Long duration timer
- Watchdog timer
- CPU temperature monitor
- Legacy speaker interface
- Up to 4 x USB 2.0 interfaces:-
- 1 via front panel
- 1 via front panel on optional second slot board
- 2 via J2
- PS/2 Keyboard and Mouse via single mini-DIN connector on optional second slot front panel
- 2 x GPIO signals via J2
|
| Compact PCI Interfaces |
- Compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels:
- universal signaling support
- 33/66 MHz; 32-bit interface accessed via J1
- Utilizing a PCI-PCI bridge for off-board accesses
- Operates as a System Slot controller supporting up to 7 peripheral slots
- Supports hot-swapping peripheral boards:-
- PICMG 2.1 R2.0 Hot Swap Specification
|
| Electrical Specifications |
- +5V@3.4A (typical at 1.8 GHz with 1 Gbyte DRAM)
- +3.3V@3.3A (typical at 1.8 GHz with 1 Gbyte DRAM)
- +12V and -12V not required
- all voltages are tolerant to +5% / -3%
|
| Safety |
PCB (PWB) manufactured with flammability rating of 94V-0 |
Environmental Specification |
Operating temperatures:
- 0°C to +55°C (N-Series: up to 1.8 GHz)
- -25°C to +70°C (E-Series: 1.4 GHz)
- -40°C to +85°C (K-Series: 1.4 GHz)
- 10% to 90% Relative Humidity, non-condensing (operating):
- K-Series includes humidity sealant
- -40°C to +85°C (storage)
- 10% to 90% Relative Humidity, non-condensing (storage)
|
| Mechanical Specification |
- 3U form-factor: 3.9 inches x 6.3 inches (100mm x 160mm)
- Single or dual slot
- Connectors: IEC-1076-4-101 for J1-J2
- Shock:
20g, 11ms, ½ sine (operating);
30g, 11ms, ½ sine (non-operating)
- Vibration:
5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);
5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)
|
