Products > Communication > Carrier Boards > Processing Platform for CPCI
 
 

Intelligent PTMC CPCI Carrier Board

1.0 GHz power PC based carrier board; dual PTMC sites; 2 Gb Ethernet ports; up to 1 Gb SD RAM

Part Number: OSS-CPCI-HighWire HW400c/2

Product Features

  • MPC7447A PowerPC processor, 1.0 GHz
  • Two CT Bus enabled PTMC sites (autosensing PT2MC or PT5MC)
  • High speed non-blocking Gigabit
  • Ethernet switch
  • Dual node Gigabit Ethernet (PICMG 2.16 cPSB)
  • Full and basic CompactPCI Hot Swap (PICMG 2.1)
  • Up to 1 GB DDR333 SDRAM
  • 128 MB Flash File System

Specifications


SYSTEM PROCESSOR ARCHITECTURE: • Freescale MPC7447A PowerPC, 1.0 GHz
• Marvell MV64462 System Controller
   
MEMORY: • 256 MB or 1 GB DDR SDRAM
• 128 MB Disk-on-Chip Flash File System
• Boot ROM and NVRAM
   
PTMC SITES: • 2x PICMG 2.15, PT2MC, PT5MC sites
  • 3.3V signaling
• PICMG 2.3 Rear I/O Mapping
   
PSB/GIGABIT ETHERNET: • 2x 10/100/1000 Ethernet cPSB
  • PICMG 2.16 Single or Dual Node
• 2x 10/100/1000 Ethernet per PT5MC site
• Additional Front Panel RJ45 Ethernet
   
H.110 INTERFACE: • PICMG 2.5 CT Bus Interface
• 4096 Timeslot H.110
• 2560 Timeslot Local CT Bus (PT2MC)
• 4096 Timeslot Local CT Bus (PT5MC)
   
COMPACTPCI INTERFACE: • 32/64-bit, 33/66 MHz PCI 2.2
• PICMG 2.1 R2.0 Full Hot Swap
• CompactPCI 6U x 4HP (single slot)
   
POWER REQUIREMENTS: • 20 W (max) @ +5 VDC
• 5.3 W (max) @ +3.3 VDC
• 10.7 W (max) @ VIO
• PTMC sites @ up to 15 W per site
   
CERTIFICATIONS: • CE, UL, cUL, FCC Class A (pending)
   
DRIVERS: • Linux

Download Data Sheet

   
Download User Manual
Sign up for our Newsletter
Email: