> Embedded Products > Ethernet/T1 Boards > Ethernet > Gigabit Ethernet PCI adapter
 
 

Gigabit Ethernet PCI adapter

High-performance, low cost LAN connectivity solution for any system or networking device utilizing the PCI standard bus architecture.

Part Number: OSS-PCI-LAN-4GC

Product Features

  • Four auto-negotiating 10/100/1000 Ethernet ports
  • 33/66 MHz, 32/64-bit PCI 2.2 bus interface
  • Link and activity LEDs
  • VLAN tag filtering, insertion and removal
  • Jumbo frame support, transmit and receive
  • IP/TCP/UDP hardware checksum calculation and verification
  • Full compliance to IEEE 802.3z, 802.3x, 802.1p and 802.1q
  • Failover and Trunking support
  • Drivers for Solaris and Linux

Specifications

Form Factor

Short form PCI (four RJ45 copper ports)

Ethernet Controller

4x Tamarack TC9021
IEEE 802.3z, IEEE 802.3x
IEEE 802.1p, IEEE 802.1q VLAN

On-board Memory 16 KB transmit, 32 KB receive
DMA Burst Transfer Rate

Up to 528 MB/sec using
16/32/64 byte bursts

Full Duplex Support

Auto-negotiating

Jumbo Frame Size

8 KB per channel

PCI Interface

32/64-bit, 33/66 MHz PCI 2.2, (3.3V signaling)

Power Requirements

12.5W

Dimensions 6.875” (175mm) L x 4.205” (107mm) H
Environmental - Operating Temperature: -5 to 60�C (23 to 140�F)
Humidity: 5 to 90% non-condensing
Environmental - Storage Temperature: -40 to 70�C (-40 to 158�F)
Humidity: 0 to 95% non-condensing
Drivers Solaris 8, 9 (age, GTF)
Linux kernel 2.4

Sign up for our Newsletter
Email:

Download Data Sheet

   
Download User Manual