3U CompactPCI CPU Board

Form Factor: 3U
Part Number: OSS-CPCI-3U-CPU-CM-1-1G

Product Features

• 3U CompactPCI CPU board with 1GHz ULV Celeron M 373 processor
• 1G DRAM
• PCI Express four x1 links

1.0 GHz Celron® M processor ultra low voltage

• Up to 1MB l2 cache integrated in Celeron® M
• Up to 2GB SDRAM system memory
  • Soldered
  • DDR2
  • 400MHz memory bus frequency
  • Dual-channel, 2x64 bits
• 4Mbits boot Flash
• CompactFlash® card interface
  • Via on-board IDE
  • Type I
  • True IDE
  • DMA support

• Parallel IDE (PATA)
  • One IDE port for local CompactFlash®
• Serial ATA (SATA)
  • Two channels via side-card connector, or: one channel via side card and one channel via rear I/O
  • Transfer rates up to 150MB/s

• Integrated in 915M chipset
  • Analog CRT DAC interface support
  • Supports max. DAC frequency up to 400MHz
  • 24-bit RAMDAC support
  • Maximum resolutions: 2048 x 1536 pixels 16M colors @ 75Hz refresh rate (analog); 1600 x 1200 pixels 16M colors @ 60Hz (digital)
  • Incorporates PanelLink Digital techonolgy (Silicon Image)
• VGA connector at front panel
• Two SDVO ports available via side-card connector
  • Two additional DVI connectors at front panel optional via side card
  • Simultaneous connection of two monitors

• USB
  • Two USB 2.0 ports via Series A connectors at front panel
  • Four USB 2.0 ports via side-card connector
  • Two USB 2.0 ports via rear I/O on request
  • UHCI and EHCI implementation
  • Data rates up to 480Mbits/s
• Ethernet
  • Two 10/100/1000Base-T Ethernet channels, or: one 10/100/1000Base-T and one 10/100Base-T channel
  • RJ45 connectors at front panel
  • Gigabit Ethernet connected by two x1 PCIe® links
  • On-board LEDs to signal activity status and connection speed
• High Definition (HD) audio
• Accessible via side-card connector

• VGA
• Two USB 2.0 (Series A)
• Two Ethernet (RJ45)

• Windows®
• Linux
• VxWorks®
• QNX (on request)

• PC-compatible Real Time Clock (Year 2000 compliant)
• Long duration timer
• Watchdog timer
• CPU temperature monitor
• Legacy speaker interface
• Up to 4 x USB 2.0 interfaces:-
  • 1 via front panel
  • 1 via front panel on optional second slot board
  • 2 via J2
  • PS/2 Keyboard and Mouse via single mini-DIN connector on optional second slot front panel
  • 2 x GPIO signals via J2

• Two x1 links to connect local 1000Base-T Ethernet
  controllers
• Two x1 links for extension through side-card connector, or:
• Three x1 links if one Gigabit Ethernet channel is
  replaced by Fast Ethernet
• Data rate 250MB/s in each direction (2.5 Gbits/s per lane)

• Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
• CompactPCI® Express support (EXP.0 R1.0)
• System slot
• 32-bit/33-MHz CompactPCI® bus
• V(I/O): +3.3V (+5V tolerant)

• Board can be supplied with +5V only, all other voltages are generated on the board
• Backplane connectors used only for power supply

Electrical Specification

• Supply voltage/power consumption:
  • +5V (-3%/+5%), approx. 2.5A (ULV Celeron® M 373)
  • +3.3V (-3%/+5%), approx. 1A
  • +12V (-10%/+10%), approx. 10mA
  • If the board is supplied with 5V only (typically
    without a bus connection), the 3.3V are generated on the board and fed to the backplane (3A max.)
• MTBF: 86,600h @ 40°C (derived from MIL-HDBK-217F)

• Dimensions: conforming to CompactPCI® specification for 3U boards
• Weight: 370g

• Temperature range (operation):
  • 2GHz Pentium® M760: 0..+60°C
  • Conditions: airflow 1.5m/s, typical power dissipation 32W, with Windows® XP operating system, 1 Gb Ethernet and hard disk, without CPU clock reduction
  • 1GHz Celeron® M373: -40..+85°C
  • Conditions: airflow 1.5m/s, typical power dissipation
  • 16W, with Windows® XP operating system, 1 Gb Ethernet and hard disk, without CPU clock reduction
• Temperature range (storage): -40..+85°C
• Relative humidity (operation): max. 95% non-condensing
• Relative humidity (storage): max. 95% non-condensing
• Altitude: -300m to + 3,000m
• Shock: 15g/11ms
• Bump: 10g/16ms
• Vibration (sinusoidal): 2g/10..150Hz
• Conformal coating on request

• PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
• Tested according to EN 55022 (radio disturbance),
  IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)