Products > Embedded Products > CPCI/CPCIe > Accessories > Extender card
 
 

Extender card

Hot swap extender supports both 32 and 64 bit transfers.

Form Factor: 3U
Part Number: OSS-CPCI-3U-EXT-HS

Product Features

  • Board Length: 7.75
  • Swap UUT without having to turn the PC power Off and On
  • Full height, 7.75 inches
  • 3.3V <=> 5V signal translator
  • On-board 3.3V regulator.
  • On-board power-on reset
  • On-board LED indicators
Specifications

Bus CPCI-64, Compact PCI, 5V or 3V, 32 or 64-bit.
Input Voltage Requirements +5V @ 200 mA, +12V & -12V @ 50 mA for each voltage at no load.
Output Ratings
  • +5V, Jumper selectable to 5 Amp or 1 Amp limit.
  • +3.3V at 2.5 Amp.
  • +/- 12V at 1 Amp.
Output Voltage Drop
  • 50 mV drop for every 1 Amp drawn for +5V, +3.3V and +VIO.
  • 30 mV drop for every 1 Amp drawn for -12V.
  • 30 mV drop for every 100 mV drawn for +12V.
Propagations Delay Less than a nanosecond from the motherboard to the UUT.
On-Off Controls Mechanical SPST switch, or an I/O remote interface.
Outputs
  • J3.2 =%V current measurement, each Volt represents 1 Amp.
  • J3.3 +12V current measurement, each Volt represents 1 Amp.
  • J3.4 +3.3V current measurements, each Volt represents 1 Amp.
  • JA – JF All Compact PCI signals.
Mechanical Dimensions Height = 7.75 inches (197 mm).

One Stop Systems Demos PCI Express (PCIe) Gen 3 Products at Embedded World 2012, Germany
One Stop Systems' Military Disk Array Ships to SOFIA Project
One Stop Systems to Present on Expanding Server Performance Through High Speed Expansion and Networking at Server Design Summit
Sign up for our Newsletter
Email:

 

Download Datasheet

 
©2011 One Stop Systems, Inc. All Rights Reserved. Contact Us