 |
  |
|
System Monitor
System monitor and control board that communications to a
host via an Ethernet or I2C connection.
Accessory
OSS-PCI-SYSMON2-MODULE
Product Features
- 8 temperatures
- 8 fan tachs
- 8 voltages
- 16 GPIO
- Communicating to a host via an Ethernet (TCP/IP, TelNet,
and UDP) or I2C connection.
- Embedded or with optional carrier boards for CPCI,
RTM, VME or PCI/PCIe form factors
- Configuration parameters stored in nonvolatile FLASH
|
Specifications
| Control and Monitoring Features |
- Monitors temperature sensors 1-8
- Monitors fan tachometers 1-8
- Monitors voltages +12V, +5V, +3.3V, -12V,
+5V (additional voltages up to 8)
- Monitors up to 8 GP inputs (may be used for
DC power signals, etc.)
- Controls up to 8 GP outputs (may be used for
LEDs, etc.)
|
| Network Configuration |
Stored in nonvolatile memory and retained
without power |
| Power Consumption |
- 237mA at 5V = 1.2 watts
- <-- the board runs on 5V only
- Can be quickly and easily changed
- Dip switch settings allow network configuration
to restore to default settings
|
| Mechanical |
- 4 inches L (9cm) x 3 inches W (7.6cm)
- 0.76 inches (1.9cm) stack height with passive
heat sink
|
| Temperature/Humidity |
- Operating Temperature — 40° to 85° C
(32° to 185° F)
- Storage Temperature — -40° to 85° C
(-40° to 185° F)
- Humidity — 5% to 90% non-condensing
|
| Ordering Options OSS-SYSMON2 |
SysMon-II System Monitor Board |
Dimensional Drawing
|
|
|
|
