| One 2 link system slot as defined in PICMG
EXP.0 with rear I/O |
| One x16 type 1 peripheral slot as defined
in PICMG EXP.0 with rear I/O |
| Two x4 type 1 peripheral slots as defined
in PICMG EXP.0 with rear I/O |
| Three x4 type 2 peripheral slots as defined
in PICMG EXP.0 with rear I/O |
| One switch slot as defined in PICMG EXP.0 |
| One Hybrid Bridge Board slot to allow bridging
the CPCIe backplane segment to the legacy backplane segment |
| Four 32-bit/33MHz legacy slots as defined
in PICMG 2.x |
| These slots support rear I/O |
| Connections to at least 1 SATA or 1 SAS hard
disk drive in front removable canisters right of the system
slot. |
| Connection to at least one USB laptop style
thin floppy disk drive right of the system slot |
| Connections to at least two PICMG 2.11 3U
compatible power supplies. |
| The backplane supports as many power and signal
headers and traces possible to reduce the number and/or length
of cables inside the chassis. |
| All slots in the backplane supports hot-swap. |
Servers
Embedded Products
