Celeron M CPU Board

Celeron M 1.3GHz CPU, 4HP, no DRAM.

Form Factor: 3U
Part Number: OSS-CPCI-3U-CPU-CM-1.3-XXX

Product Features

• Celeron 600MHz/Celeron M 1.3GHz (320) with passive cooling
• Industry tailored with DVI, PS/2, CompactFlash access on Frontpanel
• Up to 1GB PC333 DDR SDRAM w/ or w/o ECC via SODIMM-socket
• Mezzanine with onboard 2.5
• Flexibility with various 4HP/8HP options available
• Optional REAR I/O support
• Optimized cost/performance ratio

• Socket or soldered low power Celeron M processor in 479-pin
• FC-PGA and FC-BGA package with 400 MHz processor system bus.

• 333 MHz memory speed, Intel
   82855GME GMCH
• 256MByte, 512MByte or 1GByte PC333 DDR-SDRAM with or without ECC via standard 200-pin SODIMM socket

• Onboard 2.5" HDD mounting
• CompactFlash socket type II (Flash or Microdrive HDD)
• 1MB Firmware Hub for BIOS
• 8KByte EEPROM for CMOS data storing (no battery operation)

• 4HP board: Ethernet: Intel 82801DB ICH4 10/100Base-TX Ethernet controller (based on 82559; front or rear IO)
• VGA: Intel
  82855GME GMCH internal VGA controller providing 2048x1536x8bit/60Hz resolution, max. shared memory 64MB, analog CRT and DVI signals are connected to the 29-pin DVI-I connector (front IO). Dual head applications possible.
• Optional for customization an onboard LVDS interface is available.

• COM: one of the rear IO ports alternatively available on front IO
• IDE: Primary port available via mezzanine module for onboard 2.5" EIDE
• Flash Disk or HDD mounting option and in addition CompactFlash socket.

• 4HP: Ethernet: One RJ-45 with integrated LEDs (ACT, SPEED)
• DVI: 29-pin D-Sub DVI-I connector (optionally for customization a VGA-CRT 15-pin D-Sub SVGA connector is available instead of DVI)

• One 4-pin connector
• LED·s: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose |PS/2: Keyboard/Mouse
• 8HP additions to 4HP:

• One 9-pin D-Sub (RS232)
• CompactFlash: Opening for CompactFlash, CompactFlash socket with integrated ejector (not hot swappable)
• Reset: Reset button, guarded
• LED: IDE-HDD activity

The Rear I/O versions support:

• Two USB 2.0 ports
• One Fast Ethernet port without LED
• Two COM ports (TTL level)
• Primary IDE port
• CRT VGA port
• Two fan control inputs
• One general purpose output
• Input for external backup battery
• PS/2 for Keyboard and mouse

• PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz System master:|5V VI/O (3.3V on request), 7 Req/Gnt & clock lines
• Version with rear I/O on J2 PICMG 2.0

• Watchdog, software configurable, 125 msec to 256 sec. in 12 steps, generates
• IRQ, NMI or hardware reset, two stage configuration for NMI and Reset
• Hardware monitor LM87 for thermal control, fan-sense and all important onboard voltages
• ICH4 internal RTC (MC146818 compatible), RTC and 256 Byte CMOS RAM with backup, battery replaceable

• CompactPCI Core Specification PICMG 2.0 Rev. 3.0
• CompactPCI Hot Swap Specification PICMG 2.1 R2.0
• Designed to meet or exceed:- Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950
• EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2"

• Dimensions: 100mm x 160mm
• Weight: 320g / 4HP, 560g / 8HP
• MTBF: >120,000 h

• Phoenix BIOS with QuickBoot, QuietBoot, BootBlock, MultiBoot III, PC Health Monitoring, Serial port remote control with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation. LAN boot support.
• USB Floppy boot, USB memory stick boot. Plug&Play capability.
• Board identification number accessible via EEPROM
• Support for Windows 2000, XP Pro, XP Embedded, Linux, VxWorks, other OS’s may be possible, please contact us for information).

• +5V/ 11W, +3.3V/ 9W, typ. 20W at 1.3GHz (10W at 600MHz)
• +5V/20W, +3.3V/10W, max. 30W at 1.3GHz (14W at 600MHz)
• +12V / -12V not used

• Operating temp.: 0
  C to +60
  C standard
• Storage temp.: -55
  C to +85
  C
• Climatic Humidity: non condensing 93% at 40 C (acc. to IEC 60068-2-78)
• Altitude: 15.240 meter (50,000 ft.)