| Processor |
Dual Intel® Low Voltage Xeon® processor
at speeds of 1.6GHz to 2.4GHz |
| Form Factor |
Standard 6U board: 6U x 6.3" x 8HP |
| Chipset |
The OSS-62X-20 uses Serverwork’s GC-LE
chipset |
| |
Front side bus: 400/533 MHz 64-bit |
| |
Large I/O bandwidth: Two 64-bit/133MHz PCI-X
bus plus one 32-bit/33MHz bus. |
| Memory |
Up to 8GB on 4 x 184-pin latching DIMM sockets |
| |
Two DDR channels 72-bit/133MHz for interleave
operation |
| |
PC-1600/PC-2100 DDR. ECC Registered SDRAM;
all 8GB cacheable |
| CPCI Bus Interface |
PCI-X 64-bit/133MHz with universal bridge
(board can operate and access the cPCI bus from a system
or peripheral slot. |
| PMC Slot |
Up to 64-bit/133MHz PCI-X |
| |
PMC I/O module (PIM) support to J4 |
| Flash Memory |
512KB BIOS (field upgradeable) |
| |
32Kb user serial EEPROM |
| I/O Controller |
SMSC PC87417 super I/O |
| Clock |
Real-time clock with 256 bytes battery backup
CMOS RAM |
| BIOS |
Phoenix BIOS in Boot Block Flash with recovery
code; save CMOS in Flash option, and boot from LAN compatibility |
| |
Auto configuration, extended setup and VGA
by jumper |
| |
Diskless, keyboardless, and videoless operation
extensions |
| |
System, video and LAN BIOS shadowing |
| |
Programmable memory wait states |
| |
DMI & HDD SMART support |
| |
Advanced configuration and power interface
(1.0), Intelligent System Monitoring |
| |
Setup console redirection to serial port
(VT100 mode) with CMOS setup access |
| Management |
Support of IPMI via IPMI controller; monitoring
using IPMI |
| |
Watchdog timer |
| |
Silicon serial ID tag |
| |
Hardware system monitor |
| OS Compatability |
Windows 2000, 2003, XP, Linux, FreeBSD,
QNX and other operating systems |
| Compliancy |
cPCI Core Specification PICMG 2.0 R3.0 |
| |
cPCI Hot Swap Specification PICMG 2.1 R2.0 |
| |
cPCI System Management Specification PICMG
2.9 R1.0 |
| |
cPCI Packet Switching Backplane PICMG 2.16
R1.0 |
| Agency Approvals & Industry Compliance |
·Designed to meet or exceed UL 60950
3rd ed., CSA C22.22 Number 60950-95, EN 60950; IEC 60950-1 |
| |
EMI/EMC — FCC 47 CFR Part 15, Class B' CE
Mark to EN55022/EN55024 |
| Electrical Specification |
Supply voltage Vcc =+3.3V +5% -3%, +5% -3%,
+12V +-5% |
| Environmental Specification |
-40°C to +70°C (storage), 0-55°C/32-131°F
to +70°C (operating), |
| |
5% to 90% Relative Humidity, non-condensing
(operating) |
| |
5% to 90% Relative Humidity, non-condensing
(storage) |
| |
Shock 5G each axis |
| |
Vibration 1.0G, 5-500Hz each axis |
| Reliability |
MTBF:> 110,000 hours @ 30C/86F |
| |
USB voltage protected by an active breaker |
| |
Mouse/keyboard voltage protected by self-resetting
fuses |
