| Processor |
Dual Intel® Low Voltage Xeon® processor
at speeds of 1.6GHz to 2.4GHz |
| Form Factor |
Standard 6U board: 6U x 6.3" x 8HP |
| Chipset |
- The OSS-62X-20 uses Serverwork’s GC-LE
chipset
- Front side bus: 400/533 MHz 64-bit
- Large I/O bandwidth: Two 64-bit/133MHz PCI-X
bus plus one 32-bit/33MHz bus.
|
| Memory |
- Up to 8GB on 4 x 184-pin latching DIMM sockets
- Two DDR channels 72-bit/133MHz for interleave
operation
- PC-1600/PC-2100 DDR. ECC Registered SDRAM;
all 8GB cacheable
|
| CPCI Bus Interface |
PCI-X 64-bit/133MHz with universal bridge
(board can operate and access the cPCI bus from a system
or peripheral slot. |
| PMC Slot |
- Up to 64-bit/133MHz PCI-X
- PMC I/O module (PIM) support to J4
|
| Flash Memory |
- 512KB BIOS (field upgradeable)
- 32Kb user serial EEPROM
|
| I/O Controller |
SMSC PC87417 super I/O |
| Clock |
Real-time clock with 256 bytes battery backup
CMOS RAM |
| BIOS |
- Phoenix BIOS in Boot Block Flash with recovery
code; save CMOS in Flash option, and boot from LAN compatibility
- Auto configuration, extended setup and VGA
by jumper
- Diskless, keyboardless, and videoless operation
extensions
- System, video and LAN BIOS shadowing
- Programmable memory wait states
- DMI & HDD SMART support
- Advanced configuration and power interface
(1.0), Intelligent System Monitoring
- Setup console redirection to serial port
(VT100 mode) with CMOS setup access
|
| Management |
- Support of IPMI via IPMI controller; monitoring
using IPMI
- Watchdog timer
- Silicon serial ID tag
- Hardware system monitor
|
| OS Compatability |
Windows 2000, 2003, XP, Linux, FreeBSD,
QNX and other operating systems |
| Compliancy |
- cPCI Core Specification PICMG 2.0 R3.0
- cPCI Hot Swap Specification PICMG 2.1 R2.0
- cPCI System Management Specification PICMG
2.9 R1.0
- cPCI Packet Switching Backplane PICMG 2.16
R1.0
|
| Agency Approvals & Industry Compliance |
- Designed to meet or exceed UL 60950
3rd ed., CSA C22.22 Number 60950-95, EN 60950; IEC 60950-1
- EMI/EMC — FCC 47 CFR Part 15, Class B' CE
Mark to EN55022/EN55024
|
| Electrical Specification |
Supply voltage Vcc =+3.3V +5% -3%, +5% -3%,
+12V +-5% |
| Environmental Specification |
- -40°C to +70°C (storage), 0-55°C/32-131°F
to +70°C (operating),
- 5% to 90% Relative Humidity, non-condensing
(operating)
- 5% to 90% Relative Humidity, non-condensing
(storage)
- Shock 5G each axis
- Vibration 1.0G, 5-500Hz each axis
|
| Reliability |
- MTBF:> 110,000 hours @ 30C/86F
- USB voltage protected by an active breaker
- Mouse/keyboard voltage protected by self-resetting
fuses
|
Servers
Embedded Products
Download Datasheet 
