| Ethernet Interface |
- two channels
- supports 10BaseT,100BaseTx and 1000BaseT
for UTP CAT5 via RJ45 connectors on front panel
- Ethernet signals are routed via transition
module’s front panel or via PICMG® 2.16 Packet
Switching Backplane
EIDE INTERFACE: supports Ultra-DMA 33 speeds
via 40-way header option for CompactFlash/IBM Microdrive connector
or 1.8 inch disk drive fitted |
| Serial Interface |
RJ45 connectors for 2 x RS232 asynchronous
serial ports:-each channel supports TXD, RXD, RTS, CTS,
DTR, DSR and DCD controlled via Low Pin Count (LPC) bus |
| USB Interface |
1 x USB channel accessed via USB connector
on front panel |
| Parallel Printer Port |
- via 26-way header on-board
- supports all common modes of operation (for
example, EPP, ECP)
- controlled via LPC bus
|
| Floppy Disk Interface |
- via 34-way header on board
- controlled via LPC bus
|
| PMC I/O |
- 2 x 68-way high density D-type connectors
on the front panel
- Vertical on-board 68-way high density D-type
connectors
- Each connector provides 64-bits of I/O from
one PMC site
- Wiring compatible with Concurrent Technologies
PMC SCSI modules
|
| Other Interfaces |
- PC speaker via 5-way header
- 10-way header providing:-system fan monitor
- external reset
- general purpose user I/O lines (GP I/O)
|
| ELectrical Specification |
- all voltages to be within ±5%
- 5V@0.2A — quiescent current; +3.3V@0.2A
|
| Environmental Specification |
- 0°C to +55°C (operating)
- -40°C to +70°C (storage)
- 10% to 90% Relative Humidity, non-condensing
(operating)
- 10% to 90% Relative Humidity, non-condensing
(storage)
|
| Mechanical Specification |
- 6U form-factor: 9.2" x 3.2" (233.35mm
x 80mm)
- single-slot: 0.8" (20.3mm)
- connectors: IEC-1076-4-101 for J3 and J5
- shock:20g, 11ms, ½ sine (operating);
- 30g, 11ms, ½ sine (non-operating)
vibration: 5Hz-2000Hz at 2g, 0.38mm peak
displacement (operating); 5Hz-2000Hz at 5g, 0.76mm peak displacement
(non-operating). |
Servers
Embedded Products
Download Datasheet 
