Products — CPCI and CPCIe — Backplanes — Pentium D CPU OSS-61M-C-ET-11-2E-512

Products > CPCI/CPCIe > CPU Boards > Pentium D CPU

Pentium D CPU

Pentium D Core Duo up to 2.0GHz processor, system/peripheral CPU board, up to 4GB DRAM, 4HP.

Form Factor: 6U
Part Number: OSS-CPCI-6U-CPU-K-CD-2.0-XXX

Product Features

4HP, single slot CPU with passive cooling
Scalable processor speed, Intel Core Solo — Core Duo up to 2.0 GHz
Up to 4GB DDR2 400 MHz SDRAM via two SODIMM sockets
4x GigEthernet Interfaces via PCIExpress
Latest IO technology with USB 2.0 channels and SATA
XMC/PMC + onboard HDD + CompactFlash configuration possible
Rear I/O supporting PICMG 2.16

One Stop Systems' Pentium D CPU board, a 6U CompactPCI CPU board with Intel® Core Duo processor T2500 (2 GHz), meets the highest performance demands. With its E7520 and 6300ESB chipset, it handles data throughput like a server. Compared to Intel® Pentium® M, dual-core technology allows approximately twice the performance at similar power consumption. The PICMG 2.16-compliant CPU board is designed for bandwidth-intensive applications and, thanks to hot-swap support and IPMI (PICMG 2.9-compliant Intelligent Platform Management Interface) meets the highest demands for the management of high-availability applications. The CPU board offers a high degree of integration and the latest interface technologies such as PCI Express, up to 4 GB/400 MHz DDR2 SODIMM RAM (6.4 GB/sec throughput) and 2x fast Serial-ATA interfaces including hard drive on board as well as a CompactFlash slot. Four Gigabit Ethernet interfaces via PCI Express (two to the backplane / two front-side), max. 4x USB 2.0, 1xCOM, VGA, and rear I/O support round out the feature set.

Specifications

Processor	Intel Core™ Duo processor in micro-FCBGA package (65nm manufacturing process)
	- T2500: 2.00 GHz, 667 MHz FSB, 2 MB L2, FCBGA
	- L2400: LV 1.66 GHz, 667 MHz FSB, 2 MB L2, FCBGA
	All board versions are passive cooled with a heatsink within 4HP height.
	Forced air cooling at a specific flow rate is required depending on the processor version.
Memory Controller	Intel E7520 supporting various RASUM features Memory
	- Up to 4 GB DDR2 400 MHz dual channel registered SDRAM w/ ECC via two 200-pin SODIMM sockets for max. 6,4 GByte/sec data throughput
	- 2 redundant 1 MB Firmware Hub (FWH) for BIOS
	- 8 kB for storing CMOS data when operating without battery I/O
	- Four 10/100/1000 MB/s Gigabit Ethernet ports based via two Intel 82571EB dual Gigabit Ethernet PCI Express bus controller: two copper ports are routed to front two copper ports are routed to PICMG 2.16 rear pins
	- Four USB 2.0 interfaces with up to 480 Mbit/sec, two front, two rear
	- VGA Video Controller ATI ES1000 2D-engine, PCI 32-bit / 33 MHz, external memory 64MB
	- Two 16C550 compatible UARTs (COM1/2)
	- Keyboard on rear and onboard connector
	- Mouse interface on rear
	- Floppy disk controller on rear
Front Panel Connections	COM1: 9-pin D-Sub (RS232)
	VGA: 15-pin D-Sub SVGA connector
	Ethernet: 2x RJ-45
	USB: 2x 4-pin connectors
	PMC/XMC: opening for PMC/XMC front panel
	LEDs: 2x LAN activity (yellow) and speed (green) one blue control LED for hot swap
	2x for IPMI, 1x watchdog, 1x thermal contro
	8-LED-field for BIOS POST code or general purpose
	Reset: reset button, guarded
	Micro switch: for hot swap
Onboard Interfaces	- One SATA connection for an onboard 2.5" SATA HDD
	- CompactFlash type II socket
	- 22-pin connector with all LPC signals
	- PS/2 keyboard connector
	- 2x200-pin SODIMM connectors
	- 4x 64-pin PMC interface and XMC connector P15
CompactPCI Interface	PICMG 2.0 Rev. 3.0 compatible, 64 bit / 66 MHz.
	5V or 3.3V signalling, REQ/GNT for 7 slots
	Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to CompactPCI bus).
PMC/XMC Slot	One 64-bit / 66MHz PMC slot Pn1-Pn4, rear I/O Pn3 to J4, 3.3 V PCI voltage.
	Alternatively one XMC slot via P15, supporting XMC.3 x8 PCIExpress.
Supervisory Functions, Clock/Calendar	Watchdog, software configurable, 125 msec to 256 sec generates IRQ, NMI or hardware reset.
	Hardware monitor for thermal control, fan speed and all onboard voltages.
	RTC (integrated in HanceRapids) and CMOS RAM with backup, battery replaceable.
Rear I/O VIA J3/J4/J5:	J3: PICMG 2.16, VGA, COM 1/2, keyboard, mouse, USB 3/4
	J4: PMC rear I/O
	J5: SATA 1/2, IDE (secondary), Floppy
IPMI	IPMI 1.5-compliant for IPMI based management and CompactPCI System Management PICMG 2.9 R1.0.
Compliancy	CompactPCI Core Specification PICMG 2.0 Rev. 3.0
	CompactPCI Hot Swap Specification PICMG 2.1 R2.0
	CompactPCI System Management PICMG 2.9 R1.0
	CompactPCI Packet Switching Backplane PICMG 2.16 R1.0
	Designed to meet or exceed:
	- Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950
	- EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2
General	Dimensions: 233 x 160 x 20.5 mm, 6U, 4HP
	Weight: 400g
Software Support	AMI BIOS with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation
	LAN boot support.
	Board identification number accessible via EEPROM
	Support for Windows XP, XP Embedded, Windows Server 2003, Linux(other OSs may be possible, please contact us for information).
Power Consumption	Equipped with 2GB memory
	LV 1.66 GHz: max 33 W
	2.0 GHz: max 51 W
Environmental	Operating temp.: 0 oC to +60 oC standard with LV 1.66 GHz (with forced airflow)
	Storage temp.: -55 oC to +95 oC
	Climatic Humidity: non condensing 93% at 40 C (acc. to IEC 60068-2 78)
	Altitude: 50,000 ft. (15,240 m)