Pentium D CPU

Pentium D Core Duo up to 2.0GHz processor, system/peripheral CPU board, up to 4GB DRAM, 4HP.

Form Factor: 6U
Part Number: OSS-CPCI-6U-CPU-K-CD-2.0-XXX

Product Features

• 4HP, single slot CPU with passive cooling
• Scalable processor speed, Intel Core Solo — Core Duo up to 2.0 GHz
• Up to 4GB DDR2 400 MHz SDRAM via two SODIMM sockets
• 4x GigEthernet Interfaces via PCIExpress
• Latest IO technology with USB 2.0 channels and SATA
• XMC/PMC + onboard HDD + CompactFlash configuration possible
• Rear I/O supporting PICMG 2.16

• Intel Core™ Duo processor in micro-FCBGA package (65nm manufacturing process)
• - T2500: 2.00 GHz, 667 MHz FSB, 2 MB L2, FCBGA
• - L2400: LV 1.66 GHz, 667 MHz FSB, 2 MB L2, FCBGA
• All board versions are passive cooled with a heatsink within 4HP height.
• Forced air cooling at a specific flow rate is required depending on the processor version.

• Intel E7520 supporting various RASUM features Memory
• - Up to 4 GB DDR2 400 MHz dual channel registered SDRAM w/ ECC via two 200-pin SODIMM sockets for max. 6,4 GByte/sec data throughput
• 2 redundant 1 MB Firmware Hub (FWH) for BIOS
• 8 kB for storing CMOS data when operating without battery I/O
• Four 10/100/1000 MB/s Gigabit Ethernet ports based via two Intel 82571EB dual Gigabit Ethernet PCI Express bus controller: two copper ports are routed to front two copper ports are routed to PICMG 2.16 rear pins
• Four USB 2.0 interfaces with up to 480 Mbit/sec, two front, two rear
• VGA Video Controller ATI ES1000 2D-engine, PCI 32-bit / 33 MHz, external memory 64MB
• Two 16C550 compatible UARTs (COM1/2)
• Keyboard on rear and onboard connector
• Mouse interface on rear
• Floppy disk controller on rear

• COM1: 9-pin D-Sub (RS232)
• VGA: 15-pin D-Sub SVGA connector
• Ethernet: 2x RJ-45
• USB: 2x 4-pin connectors
• PMC/XMC: opening for PMC/XMC front panel
• LEDs: 2x LAN activity (yellow) and speed (green) one blue control LED for hot swap
• 2x for IPMI, 1x watchdog, 1x thermal control
• 8-LED-field for BIOS POST code or general purpose
• Reset: reset button, guarded
• Micro switch: for hot swap

• One SATA connection for an onboard 2.5" SATA HDD
• CompactFlash type II socket
• 22-pin connector with all LPC signals
• PS/2 keyboard connector
• 2x200-pin SODIMM connectors
• 4x 64-pin PMC interface and XMC connector P15

• PICMG 2.0 Rev. 3.0 compatible, 64 bit / 66 MHz.
• 5V or 3.3V signalling, REQ/GNT for 7 slots
• Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to CompactPCI bus).

• One 64-bit / 66MHz PMC slot Pn1-Pn4, rear I/O Pn3 to J4, 3.3 V PCI voltage.
• Alternatively one XMC slot via P15, supporting XMC.3 x8 PCIExpress.
• Watchdog, software configurable, 125 msec to 256 sec generates IRQ, NMI or hardware reset.

• Hardware monitor for thermal control, fan speed and all onboard voltages.
• RTC (integrated in HanceRapids) and CMOS RAM with backup, battery replaceable.

• J3: PICMG 2.16, VGA, COM 1/2, keyboard, mouse, USB 3/4
• J4: PMC rear I/O
• J5: SATA 1/2, IDE (secondary), Floppy

• IPMI 1.5-compliant for IPMI based management and CompactPCI System Management PICMG 2.9 R1.0.

• CompactPCI Core Specification PICMG 2.0 Rev. 3.0
• CompactPCI Hot Swap Specification PICMG 2.1 R2.0
• CompactPCI System Management PICMG 2.9 R1.0
• CompactPCI Packet Switching Backplane PICMG 2.16 R1.0
• CompactPCI Packet Switching Backplane PICMG 2.16 R1.0
• Designed to meet or exceed:
• Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950
• EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2

• Dimensions: 233 x 160 x 20.5 mm, 6U, 4HP
• Weight: 400g

• AMI BIOS with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation
• LAN boot support.
• Board identification number accessible via EEPROM
• Support for Windows
  XP, XP Embedded, Windows
  Server 2003, Linux(other OSs may be possible, please contact us for information).

• Equipped with 2GB memory
• LV 1.66 GHz: max 33 W
• 2.0 GHz: max 51 W

• Operating temp.: 0 oC to +60 oC standard with LV 1.66 GHz (with forced airflow)
• Storage temp.: -55 oC to +95 oC
• Climatic Humidity: non condensing 93% at 40 C (acc. to IEC 60068-2 78)
• Altitude: 50,000 ft. (15,240 m)