 |
|
|
|
  |
|
Power Supply Backplane, Dual P47
3U x 16HP power supply backplane with dual P47 power connectors.
3U
OSS-CPCI-3U-PSBP-2P47
Product Features
- Dual P47 power connectors
- 3-pin AC input connector
- Power lugs output
- 10-pin utility connector
- On/Off switch connection
|
The P47 connector has been approved by the CompacPCI Power Spec
Committee as the recommended connector for all future designs.
The One Stop Systems dual connector backplane allows designers
to meet their power requirements and maintain compatibility to
the Spec without altering current designs. In addition, the power
supply backplane allows flexibility in design by allowing the designer
to install the backplane most suitable for the application.
This
backplane routes the AC input to the power supply, which converts
it to the necessary voltages for CompactPCI and then routes those
voltages to power lugs on the rear of the backplane. Power connections
can then be easily made to existing backplanes.
The rear of the
power supply backplane contains a 3-pin AC input connector, a peripheral
power connector, an on/off switch connection, a 10-pin utility
conector and the appropriate power lugs for CompactPCI voltages.
A line can be routed from an on/off switch on the front panel to
the 2-pin connector on the rear of the backplane. Power lugs are
provided for +5V, +3.3V, +12V, -12V and ground. The 10-pin utility
connector contains signals for LEDs that can be mounted on the
front panel as well as +5V and GND.
The P47 connector backplane
provides a clean and efficient way to power a 3U CompactPCI system
for current as well as future designs.
Specifications
| Dimensions |
3.150 inches wide x 5.067 inches
high |
Dimensional Drawing
|
|
|
|
|
 |
|
 |
 |
|
 |
|
