Products — CPCI and CPCIe — Power Supplies — Power supply backplane PSBP-6138

Products > CPCI/CPCIe > Power Supplies > Power supply backplane

Power supply backplane

6U x 8HP power supply backplane with single P38 power connector.

Form Factor: 6U
Part Number: OSS-PSBP-6U-P38

Product Features

One P38 connector on front
Power lugs, ATX connector and peripheral power connectors on rear
6-layer backplane

The power supply backplane is designed for use with a modular 6U power supply that furnishes voltages suitable for the CompactPCI architecture. The backplane will accept up to a 500W modular power supply. It accepts either AC or DC current through the ATX-style input connector. Three ATX-style connectors can be used for distribution of power to modular CompactPCI backplanes. Several rows of power terminals are provided for use when large supply currents are required.

Specifications

Dimensions	10.317 inches tall x 1.550 inches wide x .125 inches thick
AC/DC power-in connector	1 x 3 style AMP Mate-N-Lock
Maximum current from line to neutral	16 Amps
	Terminals can be used to connect a DC supply when the power supply is capable of accepting DC input. DC+ and DC- are connectoed to AC Line and AC nuetral respectively.
Local and Remote Voltage Sensing	The P38 connector provides voltage sensing for +5V, +3.3V, and +12V. Voltage sensing accomplished through: ATX connector sensing, 16-pin control header sensing and a local 2x4 pin sense header.
Power Output connectors	3 x 20-pin ATX-style connectors
	Power screw terminals
Specifications	IEEE Std. 11011-1991
	ATX Specification Version 2.01, Intel COrporation, February 1997

Dimensional Drawing