| CPU |
mPGA478 socket Pentium 4 3.0GHz
processor, 400/533 MHz FSB
|
| Chipset |
Intel 845GV, Intel MCH and ICH4 [Driver Download]
|
| Memory |
Up to 2GB 200/266MHz DDR SDRAM on two 184-pin
DIMM sockets Non-ECC, Unbuffered
|
| BIOS |
AMI or Award BIOS with PC '98 support 4Mb
flash ROM (Intel FWH) for easy upgrading
|
| On-Board I/O |
Support for two enhanced IDE channel with
Ultra DMA/33/66/100
|
| |
Support 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB
floppy disk interface up to two drivers
|
| |
Two serial ports, one parallel port, one IrDA,
and three USB ports
|
| |
8 high driving GPIO (4GPI, 4GPO)
|
| |
Watchdog Timer Programmable via software from
0.5 sec. to 254.5 min.
|
| |
PS/2 Keyboard & Mouse One mini-DIN 6-pin
connector for keyboard and mouse
|
| |
One 5-pin header connector for external keyboard
connection
|
| Power Requirement |
+12V (CPU) @ 4.0A
|
| |
+12V (System) @ 0.8A
|
| |
+5V @ 2.8A
|
| |
One external power connector for stand alone
operation
|
| Board Dimension |
338.5(L) x 122(W) mm
|
| |
13.33"(L) x 4.8"(W)
|
| |
8-layer PCB
|
| Operating Temperature |
0 to 55°C
|
| Storage Temperature |
-20 to 75°C
|
| Relative Humidity |
5% to 90%, non-condensing
|
| VGA/Panel |
Intel GMCH integrated graphics controller
[DriverDownload]
|
| |
Dynamic 8~64 MB shared display memory (Intel
DVMT)
|
| |
Display resolution up to 2048 x 1536 @ 60
Hz
|
| |
TMDS/LVDS Interface support (factory optional)
|
| |
Superior 2D, 3D and video performance
|
| Ethernet |
10BASE-T/100BASE-TX Ethernet with IEEE 802.3u
auto-negotiation support [Driver Download]
|
| |
One RJ-45 connector with two LED indicators
for LAN access and link status
|
| |
Modem-Ring-On and Wake-On-LAN
|
| |
2nd LAN available thru daughter board (ROBO-N100)
|
| System Hardware Monitor |
CPU voltage, temperature and fan monitoring
|
| ATX Power Control |
ATX function with 4-pin header connect to
backplane
|
