1U NEBS-certified RAID array includes 4 hot swappable SATA/SAS drive shuttles, system monitor, 2 meter PCIe x4 expansion cable and PCIe x4 host cable adapter. LSI 8704 ELP controller supports RAID 0, 1, 1n, 5, 10, 10n, JBOD in up to 4 drives. Includes rack slides. Available in AC or DC version.
Form Factor: 1U Part Number: OSS-PCIe-1U-RAID-4-x4-AC OSS-PCIe-1U-RAID-4-x4-DC
Product Features
Up to 8TB storage in 1U (with 2TB drives)
Cable adapter easily installs in host system PCIe slot
PCIe x4 cable in 1m, 2m, 3m, 5m, 7m lengths
4-Port SATA/SAS RAID Controller
Specifications
Form Factor
1U - 1.2mm steel meets FCC/CE cert.
Dimensions WxDxH
19" x 21" x
1.75"
Weight
12 lb / 5.5 kg (without drives)
Power Supply
400W AC or DC power supply
Ordering Options
PCIe cables available in 1m, 2m, 3m, 5m, and 7m lengths.
RAID Controller
RAID Features
RAID level 0, 1, 10, 3, 5, 6, Single Disk
or JBOD
Multiple RAID selection
Online array roaming
Online RAID level/stripe size migration
Online capacity expansion and RAID level migration simultaneously
Online volume set growth
Instant availability and background initialization
Automatic drive insertion / removal detection and rebuilding
Greater than 2TB per volume set (64-bit LBA support)
Disk scrubbing/array verify scheduling for automatic repair of all configured RAID sets
Support spin down drives when not in use to extend service life (MAID)
Support NTP protocol synchronize RAID controller clock over the on board Ethernet port
Disk Bus Interface
Up to 4 SAS/SATA II HDDs (no expander capability)
Up to 3Gbps per drive port
Monitors/Indicators
System status indication through global HDD activity/fault connector, individual fault connector, LCD/I2C connector and alarm buzzer
SMTP support for email notification
SNMP support for remote manager
Enclosure management (Serial bus and SGPIO) ready
Operating System
Windows 2000/XP/Server 2003/Vista
Linux
FreeBSD
Novell Netware 6.5
Solaris 10 x86/x86_64
SCO Unixware 7.x.x
Mac OS X 10.x (EFI BIOS Support)
System Monitor
Product Features
Monitors 4 temperatures
Monitors up to 8 fan tachs
Monitors up to 4 voltages
Communications to a host via an Ethernet (TCP/IP, TelNet, and UDP) or I2C connection.
Embedded or with optional carrier boards for CPCI, RTM, VME or PCI/PCIe form factors
Configuration parameters stored in nonvolatile FLASH
Agency:
Meets or exceeds the following requirements:
• NEBS-certified, FCC Class A
• Safety UL/CSA-60950-1, EN60950-1, IEC60950-1, CB Scheme with all country deviations, IEC825-1, 2, CFR21 part 1040, CNS1436, GB4943
• RFI/EMC EN55022 Class A, 47 CFR 15B Class A, ICES-003 Class A, VCCI Class A, AS/NZ 3548 Class A, CNS 13438 Class A, KSC 5858 Class A, GB9254 Class A, EN61000-4-6, GB17625.1, EN6100-3-3
• Immunity EN55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000 4-5, IEC 61000-4-6, IEC-61000-4-8, IEC 61000-4-11
• Regulatory markings CE, FCC, ICES-003, VCCI, UL/cUL
• Certified to NEBS level 3