1U Rackmount RAID Array

1U rackmount 4-drive SATA II or SAS RAID array with RAID controller, PCIe x4 cable adapter and PCIe x4 cable.

Form Factor: 1U
Part Number: OSS-PCIe-1U-RAID-4-x4

Product Features

• Up to 4TB storage (with 1TB drives)
• Install cable adapter in PCIe host system slot
• PCIe x4 cable in .5m, 1m, 2m, 3m, 5m, 7m lengths
• 4-Port SAS RAID Controller

RAID Features

• RAID level 0, 1, 10, 3, 5, 6, Single Disk
  or JBOD
  
• Multiple RAID selection
  
• Online array roaming
  
• Online RAID level/stripe size migration
  
• Online capacity expansion and RAID level migration simultaneously
  
• Online volume set growth
  
• Instant availability and background initialization
  
• Automatic drive insertion / removal detection and rebuilding
  
• Greater than 2TB per volume set (64-bit LBA support)
  
• Disk scrubbing/array verify scheduling for automatic repair of all configured RAID sets
  
• Support spin down drives when not in use to extend service life (MAID)
  
• Support NTP protocol synchronize RAID controller clock over the on board Ethernet port

Disk Bus Interface

• Up to 4 SAS/SATA II HDDs (no expander capability)
  
• Up to 3Gbps per drive port

Monitors/Indicators

• System status indication through global HDD activity/fault connector, individual fault connector, LCD/I2C connector and alarm buzzer
  
• SMTP support for email notification
  
• SNMP support for remote manager
  
• Enclosure management (Serial bus and SGPIO) ready

Operating System

• Windows 2000/XP/Server 2003/Vista
• Linux
  
• FreeBSD
  
• Novell Netware 6.5
  
• Solaris 10 x86/x86_64
  
• SCO Unixware 7.x.x
  
• Mac OS X 10.x (EFI BIOS Support)

• Monitors up to 8 temperatures
• Monitors up to 8 fan tachs
• Monitors up to 8 voltages
• Up to 16 GPIO
• Communications to a host via an Ethernet (TCP/IP, TelNet, and UDP) or I2C connection.
• Embedded or with optional carrier boards for CPCI, RTM, VME or PCI/PCIe form factors
• Configuration parameters stored in nonvolatile FLASH