µCUBE2 expansion enclosure, 3 PCIe 3.0 slots
The µCUBE2 desktop enclosure supports up to three full-height I/O cards up to 9.55" long and includes a PCIe cable adapter and cable and a 180-watt power supply.
The µCUBE2 can support up to three full-height, single-wide PCIe cards up to 9.55” long. This allows for a great deal of flexibility in the types of PCIe add-in cards that can increase the performance of an existing workstation. The µCUBE2 connects via PCIe. The following items are included with every µCUBE2:
· µCUBE2 expansion enclosure
· Cable adapter (PCIe Only)
· PCIe Cable
· External Power Supply
· Quick Start Guide
The µCUBE2 consists of a lightweight plastic housing with a metal sled that slides out of the enclosure for quick access to the PCIe slot. A power connector and data cable connector (PCIe) are located on the rear of the sled.
Installing cards into the µCUBE2 is quick and easy. After removing the slot covers and installing the add-in cards, the sled slides back into the enclosure. For PCIe connections, install the PCIe adapter card into an open PCIe slot in the host computer. The µCUBE2 powers up when the computer turns on. There is no power switch. The µCUBE2 is ready for use and the only drivers needed are the ones required by the add-in cards.
|Enclosure||9.7”H x 4.72”W x 11” D
Front Panel LED
|Slots||One PCIe x8 Gen3
Two PCIe x4 Gen3
|Power Supply||180W power supply (external)|
|Connectivity||PCIe x1, x4, x8, x16 or Gen3 x16 and 1M PCIe cable|
|Cooling||One low CFM fan|
|Operating Environment||0-50°C 10-90% relative humidity 0-10,000 feet above sea level|
|Storing Environment||-40 to 85°C 5-96% relative humidity 0-50,000 feet above sea level|
|Agency Compliance||UL, FCC Class A
One Stop Systems warrants this product to be free of defects in material and workmanship for the warranty period purchased by the customer (1 to 5 years) from OSS beginning on the date of delivery to the original purchaser from OSS . During this period, One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, except as set forth in this warranty agreement. OSS will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the OSS manufactured product. OSS is not liable for any defects in material or workmanship of any peripherals, products or parts, which OSS does not design or manufacture (third party products). OSS will honor the original manufacturer’s warranty on these products. One Stop Systems will analyze the defective component and the customer will be charged only in the following instances:
- No problem found: $125(U.S dollars)
- Damage Due to Negligence or Mishandling: Parts and labor at $75 per hour with a $100 minimum charge (U.S. dollars). Receipt of damaged goods voids the One Stop Systems warranty.
Repair parts and replacement products will be furnished on an exchange basis and will be either new or reconditioned. All replacement parts and products shall become the property of OSS, if such parts or products are provided under this warranty agreement. In the event a defect is not related to the OSS manufactured product or is not covered by the third party product, OSS shall repair or replace the defective parts at the purchaser’s cost and deliver the defective parts to the purchaser. This limited warranty shall not apply if the product has been misused, carelessly handled, defaced, modified or altered, or if unauthorized repairs have been attempted by others. The above warranty is the only warranty authorized by OSS and is in lieu of any implied warranties, including implied warranty of merchantability and fitness for a particular purpose. In no event will One Stop Systems be liable for any such damage as lost business, lost profits, lost savings, downtime or delay, labor, repair or material cost, injury to person or property or any similar or dissimilar consequential loss or damage incurred by the purchaser, even if OSS has been advised of the possibility of such losses or damages.
Depending on the warranty service level purchased, warranty service is obtained by advanced replacement when accompanied by a signed Warranty Service Agreement form or by delivering the product to an OSS authorized repair facility with all parts and accessories as originally shipped, along with the proof of purchase and a Returned Merchandise Authorization (RMA) number. The RMA number is obtained in advance from OSS Support or Customer Service Department and is valid for 30 days. The RMA number must be clearly marked on the exterior of the original shipping container or equivalent. Purchaser will be responsible and liable for any missing or damaged parts. Purchaser agrees to pay for shipping charges one way, and to either insure the product or assume the liability for loss or damage during transit.
Ship to: One Stop Systems
ATTENTION: RMA REPAIR DEPARTMENT
2235 Enterprise Street, Suite 110
Escondido, CA 92029