Expansion Optimized Server
Expansion Optimized Server
Expansion Optimized Server
Expansion Optimized Server
Expansion Optimized Server
Expansion Optimized Server

2U EOS Server

The 2U EOS server revolutionizes the capabilities of homogenous systems containing closely coupled processors, NVMe solid-state storage, high-speed networking and accelerator co-processing elements such as GP-GPUs and FPGAs.

Categories: 
SKU: OSS-MB-2U-X11Q
Weight: 52 lb


The 2U EOS server revolutionizes the capabilities of homogenous systems containing closely coupled processors, NVMe solid-state storage, high-speed networking and accelerator co-processing elements such as GP-GPUs and FPGAs. The 2U EOS contains two of the newest Intel Scalable Processors and provides the widest BIOS compatibility with dense storage and accelerator expansion systems. This allows the highly integrated server to stand alone or form the core CPU and memory resources for a scale-out, rack level, expandable solution. The EOS server features two storage and I/O configurations providing up to six PCIe 3.0 x16 half-height slots or 24 U.2 NVMe drives. The server supports up to 4TB of memory and a resource expanded BIOS for scale-out device enumeration and large memory mapped I/O used for GP-GPUs and accelerators.

Dimensions 3.45” H x 17.2” (19” with rack ears) W x 28” D   (8.7 x 43.7 x 71 cm)
CPUs

Dual Intel® Xeon® Scalable Processors up to 205W TDP and 28 cores

LGA 3647 socket P with 3 UPI chip-to-chip bus up to 10.7GT/s
System Memory

16x 288-pin DDR4 DIMM sockets

Up to 4TB DDR4-2933MHz 3DS ECC RDIMM or LRDIMM, 1.2V low profile

2933/2666/2400/2133MHz Frequencies in 64GB, 128GB and 256GB capacities each module

Up to 2TB Intel® Optane™ DC Persistent Memory in memory mode (Cascade Lake only)
Expansion Slots

EOS configuration:

• 4 x PCIe 3.0 x16 HH/FL Double Width slots

• 2 x PCIe 3.0 x16 HH/HL Single Width slots

• 1 x PCIe 3.0 x4 HH/HL slot with x8 physical connector

• 1x PCIe3.0 x4 M.2 slot for 2280 and 22110 M-Key modules

NVMe configuration:

  • 2 x PCIe 3.0 x16 FH/HL Single Width slots
  • 2 x PCIe 3.0 x16 HH/HL Single Width slots
  • 1 x PCIe 3.0 x4 HH/HL slot with x8 physical connector
  • 1x PCIe3.0 x4 M.2 slot for 2280 and 22110 M-Key modules
Storage Subsystem

EOS  configuration:

  • 24x hot-swap configurable SATA-3, SAS-3 or NVMe x4 2.5” x 15mm drive carriers
  • 12Gb SAS-3 or 6Gb SATA-3 SFF-8680 slots via 3x SFF-8643 backplane connectors
  • NVMe x4 32Gb slots via 24x Oculink connectors
  • Up to 10 SATA-3 slots use no PCIe slots
  • 12x and 24x SAS-3 slots require 1 and 2 PCIe x16 HHHL slots respectively
  • 8x and 16x NVMe x2 slots require 1 and 2 x16 PCIe HHHL slots respectively (for 24x NVMe x4 use NVMe config)
  • Further expansion up to 4PB possible using OSS JBOF expansion systems
  • 1x M.2 x4 and 2x SATA-DOM internal drive connections

NVMe configuration

  • 24x hot-swap NVMe x4 2.5” x 15mm drive carriers
  • Up to 10 NVMe drive bays can be SATA-3 configured
  • 1x M.2 x4 and 2x SATA-DOM internal drive connections
On-board devices

Intel® C621 Express chipset

ASPEED AST2500BMC IPMI support for IPMI 2.0 with virtual medial over LAN and KVM-over-LAN support

Network Controllers

2x Intel X550 10Gigabit Ethernet each with an RJ-45

Additional 25, 40 and 100Gb Ethernet, 100Gb Infiniband or 32Gb Fiber Channel interfaces available

USB

5 USB 3.0 with 2 on rear panel, 2 on front panel and 1 Type A internal

4 USB 2.0 with 2 on rear panel and 2 internal headers
Input/Output

7.1HD Audio Header, 1 VGA port, 2 COM ports (1 rear and 1internal header

2 Disk-on-Module ports

1 Trusted Platform Management TPM 1.2 20-pin header

BIOS

128 Mb SPI flash EEPROM with AMI BIOS

Supports PnP, PCI 3.0, ACPI 1.0-4.0, USB keyboard support, UEFI 2.3.1,

1TB BAR1 max size and 256 PCI bus enumeration support

Cooling Fans Four 80mm x 38mm PWM hot-swap Cooling fans
Chassis

Rugged steel enclosure

Liquid paint with customizable front bezel
Weight 33-48lbs (15-22 kg)
Power Supply

1000W 90-264VAC, 47-63Hz Input:

  • 1+1 Redundant 80plus Silver efficiency with Active PFC, PM Bus and Over Voltage Protection
  • 15A input current at 115VAC and 7.5A at 230VAC each module
  • 15A @ 115VAC and 30A @ 230VAC  max inrush current each module

EPS 12V Output type with 22A at+5V, 83A at +12V, 0.5A at -12V, 22A at+3.3V and 3A at +5V Standby

Environment

Operating:

  • 5°C to 35°C (41°F to 95°F) at 0 to 915m (3,000ft) altitude
  • 5% to 90% non-condensing relative humidity, max dew point 21°C, max rate of change 5°C/hr

Non-Operating:

  • -20C to 60°C (-40°F to 140°F)

5% to 90% non-condensing relative humidity, max dew point 27°C, max rate of change 5°C/hr

Agency

Tested  to conform to the following standards:

  • FCC - Verified to comply with Part 15 of the FCC Rules, Class A
  • Canada ICES-003, issue 4, Class A
  • UL/IEC 60950-1
  • CSA C22.2 No. 60950-1
  • IEC 60950-1 (CB Certificate and CB Test Report)
  • CE Mark (EN55022 Class A, EN60950-1, EN55024, EN61000-3-2, EN61000-3-3)
  • CISPR 22, Class A

Designed  to conform to the following extended standards:

  • NOM-019
  • Argentina IEC60950-1
  • Japan VCCI, Class A
  • Australia/New Zealand AS/NZS CISPR 22, Class A
  • China CCC (GB4943), GB9254 Class A, GB17625.1
  • Taiwan BSMI CNS13438, Class A; CNS14336-1
  • Korea KN22, Class A; KN24
  • Russia/GOST ME01, IEC-60950-1, GOST R 51318.22, GOST R 51318.24, GOST R 51317.3.2,
  • GOST R 51317.3.3

TUV-GS (EN60950-1 /IEC60950-1,EK1-ITB2000)

Compliance RoHS 6 of 6, WEEE

Warranty Information:

One Stop Systems warrants this product to be free of defects in material and workmanship for the warranty period purchased by the customer (1 to 5 years) from OSS beginning on the date of delivery to the original purchaser from OSS . During this period, One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, except as set forth in this warranty agreement. OSS will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the OSS manufactured product. OSS is not liable for any defects in material or workmanship of any peripherals, products or parts, which OSS does not design or manufacture (third party products). OSS will honor the original manufacturer’s warranty on these products. One Stop Systems will analyze the defective component and the customer will be charged only in the following instances:

  • No problem found: $125(U.S dollars)
  • Damage Due to Negligence or Mishandling: Parts and labor at $75 per hour with a $100 minimum charge (U.S. dollars). Receipt of damaged goods voids the One Stop Systems warranty.

Repair parts and replacement products will be furnished on an exchange basis and will be either new or reconditioned. All replacement parts and products shall become the property of OSS, if such parts or products are provided under this warranty agreement. In the event a defect is not related to the OSS manufactured product or is not covered by the third party product, OSS shall repair or replace the defective parts at the purchaser’s cost and deliver the defective parts to the purchaser. This limited warranty shall not apply if the product has been misused, carelessly handled, defaced, modified or altered, or if unauthorized repairs have been attempted by others. The above warranty is the only warranty authorized by OSS and is in lieu of any implied warranties, including implied warranty of merchantability and fitness for a particular purpose. In no event will One Stop Systems be liable for any such damage as lost business, lost profits, lost savings, downtime or delay, labor, repair or material cost, injury to person or property or any similar or dissimilar consequential loss or damage incurred by the purchaser, even if OSS has been advised of the possibility of such losses or damages.

Depending on the warranty service level purchased, warranty service is obtained by advanced replacement when accompanied by a signed Warranty Service Agreement form or by delivering the product to an OSS authorized repair facility with all parts and accessories as originally shipped, along with the proof of purchase and a Returned Merchandise Authorization (RMA) number. The RMA number is obtained in advance from OSS Support or Customer Service Department and is valid for 30 days. The RMA number must be clearly marked on the exterior of the original shipping container or equivalent. Purchaser will be responsible and liable for any missing or damaged parts. Purchaser agrees to pay for shipping charges one way, and to either insure the product or assume the liability for loss or damage during transit.

Ship to: One Stop Systems

ATTENTION: RMA REPAIR DEPARTMENT

RMA####

2235 Enterprise Street, Suite 110

Escondido, CA 92029


Support: support@onestopsystems.com or 877-438-2724

Documents:

Datasheet