PCIe Gen 4 3U Short Depth Intel Server (SDS-3U-4i)
The 20” deep SDS-3U-4i contains two Intel Scalable Processors and provides a feature packed server platform for GPU or FPGA accelerated computing, NVMe storage PCIe Gen 4 expansion slots.
The 20” deep SDS-3U-4i contains two Intel Scalable Processors and provides a feature packed server platform for GPU or FPGA accelerated computing, NVMe storage PCIe Gen 4 expansion slots. This functionality is delivered in a size efficient, edge ready rugged chassis with 3U height and 20” depth. This highly integrated server can operate stand alone as a hyperconverged PCIe Gen 4 server or form the core CPU and memory resources for a scale-out, rack level, expandable or composable solution in the shallowest available racks. The SDS-4U-4i features six PCIe Gen 4 x16 full-height slots (four of which are double-width), one PCIe Gen 4 x8 full-height slot and options for 8 or 16 SATA/SAS/NVMe drives. The server supports up to 4TB of memory and a resource expanded BIOS for scale-out device enumeration and large memory mapped I/O used for GPUs and accelerators.
- Dual Intel® Xeon™ Scalable Ice Lake Processors
- 20” Depth
- 2x Internal 2.5” Boot Drives
- 8x or 16x 2.5” front removable NVMe drives
- 4 x16 FH dual width plus 2 x16 FH and 1 x8 FH single width PCIe 4.0 slots
- Embedded Dual-Port 10Gb/e Network Interfaces
- System Monitoring
- AC or DC Input Power Supplies
- Guaranteed to operate with all OSS expansion products
|Dimensions||5.2” H x 17.0” (19” with rack ears) W x 20.0” D|
Dual Intel® Xeon® Ice Lake Scalable CPUs up to 270W TDP and 40 coresLGA 4189 socket P with 3 UPI chip-to-chip bus up to 11.2GT/s
16x 288-pin DDR4 DIMM sockets
Up to 4TB DDR4-2933MHz 3DS ECC RDIMM or LRDIMM, 1.2V low profile
2933/2666/2400/2133MHz Frequencies in 64GB, 128GB and 256GB capacities each module
4x PCIe 4.0 x16 full height, 10.5” length, double width slots suitable for GPUs
2 x PCIe 4.0 x16 full height, half length, single width slots
1 x PCIe 4.0 x8 full Height, half length, single width slot with x8 physical connector
8x or 16x hot-swap configurable SATA-3, SAS-3 or NVMe x4 2.5” x 15mm drive carriers
Up to 8 SATA-3 slots use no PCIe slots
8x and 16x SAS-3 slots require 1 and 2 PCIe x16 HHHL slots respectively
8x and 16x NVMe x2 slots require 1 and 2 x16 PCIe HHHL slots respectively
Further expansion up to 4PB possible using OSS JBOF expansion systems such as the SB2000
2x M.2 x4 and 2x SATA-DOM internal drive connection
2x Intel X550 10Gigabit Ethernet each with an RJ-45
Additional 25, 40 and 100Gb Ethernet, 100Gb Infiniband or 32Gb Fiber Channel interfaces available
2x RJ45 10GBASE-T LAN from Intel® X550-AT2
1 x RJ45 Dedicated IPMI LAN port from RTL8211E
6x USB 3.0 with 4 on rear panel, 1x header and 1x Type A internal 2x USB 2.0 (1 internal header)
7.1HD Audio Header, 1 VGA port, 2 COM ports (1 rear and 1internal header)
2x Disk-on-Module ports
1x Trusted Platform Management TPM 1.2 20-pin header
128 Mb SPI flash EEPROM with AMI BIOS
Supports PnP, PCI 3.0, ACPI 1.0-4.0, USB keyboard support, UEFI 2.3.1, 1TB BAR1 max size and 256 PCI bus enumeration support
|Cooling Fans||(6) 40x56mm and (1) 80x38mm high powered fans mount behind front bezel and cool add-in-cards up to 300w; comes with manual fan speed control dial|
Rugged steel enclosure. Aluminum options available for low-weight applications.
3U honeycomb front bezel with replaceable air filter opens providing access to up to 16 2.5” SATA, SAS, or NVMe SSDs.
Dual N+1 1200 watt AC 115-240V Power Supplies
Dual N+1 48V DC Input Power Supplies
Tested to conform to the following standards:
Designed to conform to the following extended standards:
|Compliance||RoHS 3, WEEE|
One Stop Systems warrants this product to be free of defects in material and workmanship for the warranty period purchased by the customer (1 to 5 years) from OSS beginning on the date of delivery to the original purchaser from OSS . During this period, One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, except as set forth in this warranty agreement. OSS will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the OSS manufactured product. OSS is not liable for any defects in material or workmanship of any peripherals, products or parts, which OSS does not design or manufacture (third party products). OSS will honor the original manufacturer’s warranty on these products. One Stop Systems will analyze the defective component and the customer will be charged only in the following instances:
- No problem found: $125(U.S dollars)
- Damage Due to Negligence or Mishandling: Parts and labor at $75 per hour with a $100 minimum charge (U.S. dollars). Receipt of damaged goods voids the One Stop Systems warranty.
Repair parts and replacement products will be furnished on an exchange basis and will be either new or reconditioned. All replacement parts and products shall become the property of OSS, if such parts or products are provided under this warranty agreement. In the event a defect is not related to the OSS manufactured product or is not covered by the third party product, OSS shall repair or replace the defective parts at the purchaser’s cost and deliver the defective parts to the purchaser. This limited warranty shall not apply if the product has been misused, carelessly handled, defaced, modified or altered, or if unauthorized repairs have been attempted by others. The above warranty is the only warranty authorized by OSS and is in lieu of any implied warranties, including implied warranty of merchantability and fitness for a particular purpose. In no event will One Stop Systems be liable for any such damage as lost business, lost profits, lost savings, downtime or delay, labor, repair or material cost, injury to person or property or any similar or dissimilar consequential loss or damage incurred by the purchaser, even if OSS has been advised of the possibility of such losses or damages.
Depending on the warranty service level purchased, warranty service is obtained by advanced replacement when accompanied by a signed Warranty Service Agreement form or by delivering the product to an OSS authorized repair facility with all parts and accessories as originally shipped, along with the proof of purchase and a Returned Merchandise Authorization (RMA) number. The RMA number is obtained in advance from OSS Support or Customer Service Department and is valid for 30 days. The RMA number must be clearly marked on the exterior of the original shipping container or equivalent. Purchaser will be responsible and liable for any missing or damaged parts. Purchaser agrees to pay for shipping charges one way, and to either insure the product or assume the liability for loss or damage during transit.
Ship to: One Stop Systems
ATTENTION: RMA REPAIR DEPARTMENT
2235 Enterprise Street, Suite 110
Escondido, CA 92029