PCIe Gen4 Dual M.2 Carrier Card
PCIe Gen4 Dual M.2 Carrier Card
PCIe Gen4 Dual M.2 Carrier Card
PCIe Gen4 Dual M.2 Carrier Card
PCIe Gen4 Dual M.2 Carrier Card
PCIe Gen4 Dual M.2 Carrier Card

PCIe Gen4 Dual M.2 Carrier Card

Please call for pricing information.

PCIe x16 Gen 4 add-in card supporting dual Gen 4 hot-swap M.2 drives in removable carriers and dual SFF-8643 connectors supporting additional NVMe expansion. The hot-swap removable carriers provide interchangeability and flexibility at Gen 4 M.2 speeds for edge applications while providing scalability through the additional SFF-8643 internal connections.

SKU: OSS-PCIe4-ADPT-x8-M.2-2
Weight: 2 lb


  • Operates at up to 256Gb/s at PCIe Gen 4 speeds
  • Dual PCIe 4.0 NVMe M.2 slots
  • Hot-swap removable drive carriers
  • Dual SFF-8643 connectors for additional PCIe 4.0
  • expansion options
  • Supports M.2 2242/2260/2280
  • Can be modified to support 22110 M.2 and EDSFF form factors
  • Supports PCIe 3.0 backward compatibility

PCIe Gen4 Dual M.2 Carrier Card

Form Factor PCIe 4.0 x16 add-in card
Dimensions 8.1” x 4.2” (20.57 x 10.67 cm) at 0.063” (1.6mm) thickness
Bandwidth Up to 256Gb/s
Drive Form Factors

Drive form factors supported:

  • PCIe 4.0 NVMe M.2 2242, 2260, 2280 SSDs
  • PCIe 3.0 NVMe M.2 2242, 2260, 2280 SSDs
  • Canisters can be modified to support 22110 M.2 and EDSFF form factors
Connectors

PCIe x16 card edge connector

Dual SFF-8643 internal connectors

Compliant to PCI-SIG PCI Express® External Cable Specification 3.0

Bracket

Standard full-height

PCIe Switch

Broadcom PLXPEX88032

  • 16 GT/s 32-Lane PCI Express Gen 4 Switch
  • DMA controller
  • SSC Isolation
Power

45W

Operating Temperature 0°C to 40°C (200LFM airflow required) based on 1.7°C/W
Storage Temperature -40˚C to 85˚C
Operating Humidity 20% to 80% relative humidity non-condensing
Storage Humidity 20% to 80% non-condensing
Agency Compliance

Designed to meet the following agency standards:

  • FCC – Part 15 Class A, 47CFR; Canada ICES-003, issue 4, Class A; Japan: VCCI, Class A’ CE Emissions 2004-108EC
  • UL/IEC 60950-1; Canada: CSA C22.2 No. 60950-1; Argentina: IEC60950-1; IEC 60950-1 (CB Certificate and CB Test Report)
  • CE Mark (EN55022 Class A, EN60950-1, EN55024, EN61000-3-2, EN61000-3-3)
  • CISPR 22, CISPR 24, Class A; Australia/New Zealand AS/NZS CISPR 22, Class A
  • RoHS 6 of 6 compliance (Directive 2002/95/EC)
  • WEEE (EU 2012/19) & RoHS 3 (EU 2015/863)

 

 

Warranty Information:

One Stop Systems warrants this product to be free of defects in material and workmanship for the warranty period purchased by the customer (1 to 5 years) from OSS beginning on the date of delivery to the original purchaser from OSS . During this period, One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, except as set forth in this warranty agreement. OSS will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the OSS manufactured product. OSS is not liable for any defects in material or workmanship of any peripherals, products or parts, which OSS does not design or manufacture (third party products). OSS will honor the original manufacturer’s warranty on these products. One Stop Systems will analyze the defective component and the customer will be charged only in the following instances:

  • No problem found: $125(U.S dollars)
  • Damage Due to Negligence or Mishandling: Parts and labor at $75 per hour with a $100 minimum charge (U.S. dollars). Receipt of damaged goods voids the One Stop Systems warranty.

Repair parts and replacement products will be furnished on an exchange basis and will be either new or reconditioned. All replacement parts and products shall become the property of OSS, if such parts or products are provided under this warranty agreement. In the event a defect is not related to the OSS manufactured product or is not covered by the third party product, OSS shall repair or replace the defective parts at the purchaser’s cost and deliver the defective parts to the purchaser. This limited warranty shall not apply if the product has been misused, carelessly handled, defaced, modified or altered, or if unauthorized repairs have been attempted by others. The above warranty is the only warranty authorized by OSS and is in lieu of any implied warranties, including implied warranty of merchantability and fitness for a particular purpose. In no event will One Stop Systems be liable for any such damage as lost business, lost profits, lost savings, downtime or delay, labor, repair or material cost, injury to person or property or any similar or dissimilar consequential loss or damage incurred by the purchaser, even if OSS has been advised of the possibility of such losses or damages.

Depending on the warranty service level purchased, warranty service is obtained by advanced replacement when accompanied by a signed Warranty Service Agreement form or by delivering the product to an OSS authorized repair facility with all parts and accessories as originally shipped, along with the proof of purchase and a Returned Merchandise Authorization (RMA) number. The RMA number is obtained in advance from OSS Support or Customer Service Department and is valid for 30 days. The RMA number must be clearly marked on the exterior of the original shipping container or equivalent. Purchaser will be responsible and liable for any missing or damaged parts. Purchaser agrees to pay for shipping charges one way, and to either insure the product or assume the liability for loss or damage during transit.

Ship to: One Stop Systems

ATTENTION: RMA REPAIR DEPARTMENT

RMA####

2235 Enterprise Street, Suite 110

Escondido, CA 92029


Support: support@onestopsystems.com or 877-438-2724

Documents:

Datasheet

Manual