• Operates at 40Gb/s
•Expands up to an additional 20-slots.
•The Gen 2 PCIe x8 host interface board installs in the x8 or x16 slot of a motherboard.
•PCIe x4/x8 expansion link board installs in the system host slot of a PCIe backplane.
•PCIe x8 cable with PCIe x8 cable connectors in 1m, 2m and 3m lengths
PCIe x8 Gen 2 Host Cable Adapter
|Form Factor||PCIe half-card|
|Operating Temperature||0˚C to +70˚C environment|
|Storage Temperature||-40˚C to 85˚C|
|Operating Humidity||10% to 90% relative humidity non-condensing|
|Storage Humidity||5% to 95% relative humidity non-condensing|
|Connectors||PCIe x8 cable connector PCIe x8 edge connector|
|Industry Specifications||PCIe External Cabling Specification, Rev. 1.0 PCI Express™ Card Electromechanical Specification, Rev. 2.0 PCI Express ® Base Specification, Rev. 2.0 ATX Specification, Version 2.2|
|Re-drivers||5.0 Gbps 4-Lane PCI Express Gen 2 Re-Driver with Equalization & Emphasis Pericom Part number PI2EQX5804|
|Bracket||HIB2 x8 add-in card bracket Standard and low profile brackets available No LEDs on bracket|
|Agency Compliance||FCC Class B CE RoHS|
PCIe x4/x8 Gen 2 Expansion Link Board
|Form Factor||PICMG 1.3 SHB Express system slot compliant|
|Slot Type||System slot for the expansion chassis|
|Dimensions (H x L)||4.375 x 6.6 in (111 x 161 mm) 1 slot wide|
|Switch||PLX PEX8632 32 lane switch|
|Upstream Interface||PCIe x4 over cable PCIe x8 over cable|
|Downstream Interface||20 lanes of PCI Express can be auto-configured as: • One x16 and one x4 PCIe links • Two x8 and one x4 PCIe links • Five x4 PCIe links|
|Front Panel Connectors||1 PCIe x4 cable connector 1 PCIe x8 cable connector|
|Front Panel Indicators||1 green LED for x4 1 green LED for x8|
|Internal Indicators||Power In-range Indicators for +12V, +3.3V & VTT (Red/Green) Power on indicator for +1V (Green) Bank of 5 board status indicators (Red)|
|Optional Features||Switch Control: 3 banks of DIP switches for PEX8632 configuration Switch Debug Port: Internal JTAG communications header Heat Sink: On-board fan header provided for optional heat sink fan|
|Environmental||Operating Temperature: 0° to 70°C (32° to 158°F) Storage Temperature: -40° to 85°C (-40° to 185°F) Operating Humidity: 10 to 90% non-condensing Storage Humidity: 5 to 95% non-condensing Shock: 30g acceleration peak (11ms pulse) Vibration: 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration|
|Power Consumption||9W typical, 11.4W max +12V @ 0.675A max, 3.3V @ 1.0A Max, 5V aux @ 2.5mA max|
|Agency Compliance||FCC Class B CE RoHS|
One Stop Systems warrants this product to be free of defects in material and workmanship for the warranty period purchased by the customer (1 to 5 years) from OSS beginning on the date of delivery to the original purchaser from OSS . During this period, One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, except as set forth in this warranty agreement. OSS will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the OSS manufactured product. OSS is not liable for any defects in material or workmanship of any peripherals, products or parts, which OSS does not design or manufacture (third party products). OSS will honor the original manufacturer’s warranty on these products. One Stop Systems will analyze the defective component and the customer will be charged only in the following instances:
- No problem found: $125(U.S dollars)
- Damage Due to Negligence or Mishandling: Parts and labor at $75 per hour with a $100 minimum charge (U.S. dollars). Receipt of damaged goods voids the One Stop Systems warranty.
Repair parts and replacement products will be furnished on an exchange basis and will be either new or reconditioned. All replacement parts and products shall become the property of OSS, if such parts or products are provided under this warranty agreement. In the event a defect is not related to the OSS manufactured product or is not covered by the third party product, OSS shall repair or replace the defective parts at the purchaser’s cost and deliver the defective parts to the purchaser. This limited warranty shall not apply if the product has been misused, carelessly handled, defaced, modified or altered, or if unauthorized repairs have been attempted by others. The above warranty is the only warranty authorized by OSS and is in lieu of any implied warranties, including implied warranty of merchantability and fitness for a particular purpose. In no event will One Stop Systems be liable for any such damage as lost business, lost profits, lost savings, downtime or delay, labor, repair or material cost, injury to person or property or any similar or dissimilar consequential loss or damage incurred by the purchaser, even if OSS has been advised of the possibility of such losses or damages.
Depending on the warranty service level purchased, warranty service is obtained by advanced replacement when accompanied by a signed Warranty Service Agreement form or by delivering the product to an OSS authorized repair facility with all parts and accessories as originally shipped, along with the proof of purchase and a Returned Merchandise Authorization (RMA) number. The RMA number is obtained in advance from OSS Support or Customer Service Department and is valid for 30 days. The RMA number must be clearly marked on the exterior of the original shipping container or equivalent. Purchaser will be responsible and liable for any missing or damaged parts. Purchaser agrees to pay for shipping charges one way, and to either insure the product or assume the liability for loss or damage during transit.
Ship to: One Stop Systems
ATTENTION: RMA REPAIR DEPARTMENT
2235 Enterprise Street, Suite 110
Escondido, CA 92029