Switch-based Cable Adapter, PCI Express x4 Gen 2 Host
PCIe x4 Gen 2 cable adapter with PCIe switch (including NT port and DMA controller) operates in upstream or downstream mode with DIP switch setting change.
PCIe cable adapters install easily into a computer's PCIe slot. A PCIe cable can then be plugged into the adapter to extend the PCIe bus from the motherboard to an external device, like an expansion enclosure or storage device. The PCIe x4 adapter has an 8-lane switch with built-in DMA controller and extends the PCIe bus at 20Gb/s with extremely low latency because there is no conversion software.
The host adapter installs in the host computer’s PCIe x4 I/O slot, allowing communication between the processor and multiple I/O points
Insert the host cable adapter into a PCIe x4 in the host system slot. Make sure that the card is well seated and tighten the screw on the face plate. Attach the cable by inserting the cable into the slot and pushing on the metal tab to raise the metal pins. Release the metal tab ones the pins are aligned with the pin holes.
|Form Factor||PCIe low profile|
|Operating Temperature||0˚C to +50˚C environment|
|Storage Temperature||-40˚C to 85˚C|
|Operating Humidity||10% to 90% relative humidity non-condensing|
|Storage Humidity||5% to 95% relative humidity non-condensing|
|Power||0.4A @ 12V|
|Connectors||• PCIe x4 cable connector
• PCIe x4 edge connector
|Industry Specifications||• PCIe External Cabling Specification, Rev. 1.0
• PCI Express™ Card Electromechanical
Specification, Rev. 2.0
• PCI Express ® Base Specification, Rev. 2.0
|PCB||• PCI Express add-in card standard
• PCIe x4 cable to front panel
|PCIe Switch||• 5.0 Gbps 4-Lane PCI Express Gen 2|
|Bracket||• Standard and low profile brackets available
• Cable connection LED
|Agency Compliance||Designed to meet:
• FCC Class B