PCIe 4.0 1U EOS Server (EOS-1U)

The EOS-1U contains an AMD EPYC™ 7002 Series Processor, provides next generation NVMe & I/O support and supports OSS 256Gb/s PCIe 4.0 expansion.

Categories: 
SKU: OSS-EOS-1U
Weight: 22 lb


The EOS-1U contains an AMD EPYC™ 7002 Series Processor, provides next generation NVMe & I/O support and supports OSS 256Gb/s PCIe 4.0 expansion. This allows the highly integrated server to stand alone or form the core CPU and memory resources for a scale-out, rack level, expandable solution. The EOS-1U server provides up to two PCIe 4.0 x16 full-height, full length slots and 1 PCIe 4.0 x16 (LP) slots. The server supports up to 4 hot-swap 3.5” SATA3 drive bays or 4 U.2 NVMe (PCIe 3.0) drives. The EOS-1U has a resource expanded BIOS for scale-out device enumeration and large memory mapped I/O used for GP-GPUs and accelerators.

Features

  • 1 AMD EPYC™ 7002 Series Processor
  • Next generation NVMe & I/O support
  • Supports OSS 256Gb/s PCIe 4.0 expansion
  • Up to 2 x16 PCIe 4.0 x16 FHFL expansion slots
  • 1 PCIe 4.0 x16 (LP) slot
  • 4 hot-swap 3.5” SATA3 drive bays
  • Optional 4 U.2 NVMe (PCIe 3.0) drives
  • 500W redundant power supplies
  • Resource expanded BIOS for large expansion capability
  • Guaranteed to operate with all OSS expansion products
Dimensions 1.75” H x 17.2” W x 25.6” D
CPUs

Single AMD EPYC™ 7002 Series Processor

Socket SP3

Support CPU TDP up to 240W

System Memory

8 DIMM slots

Up to 2TB 3DS ECC DDR4-3200MHz RDIMM/LRDIMM

DDR 3200 MHz Registered ECC, 288-pin gold-plated DIMMs

Expansion Slots

2 PCIe 4.0 x16 FHHL slots

1 PCIe 4.0 x16 (LP) slot

2 PCIe/SATA 3.0 x2 NVMe M.2 slots

Storage Subsystem

4 U.2 NVMe Support

4 SATA3 (6Gbps) ports

On-board devices

System on chip

SATA 3 (6Gbps)

Network Controllers

Dual 10GBase-T LAN with via Broadcom BCM57416

USB

5 USB 3.0 ports with 4 on rear panel, and 1 Type A internal

Input/Output

2 RJ45 10GBase-T ports

1 RJ45 Dedicated IPMI LAN port

5 USB 3.0 ports (4 rear, 1 Type A)

1 VGA port

2 SuperDOM (Disk on Mobile) ports

BIOS

AMI 32 Mb SPI flash ROM

Cooling Fans 4 Counter-rotating 4cm PWM fans, 2 fans for cooling AOC
Weight 22lbs
Power Supply

500W

Environment

Operating:

  • 5°C to 35°C (41°F to 95°F) at 0 to 915m (3,000ft) altitude
  • 5% to 90% non-condensing relative humidity, max dew point 21°C, max rate of change 5°C/hr

Non-Operating:

  • -20C to 60°C (-40°F to 140°F)
  • 5% to 90% non-condensing relative humidity, max dew point 27°C, max rate of change 5°C/hr
Agency

Tested  to conform to the following standards:

  • FCC - Verified to comply with Part 15 of the FCC Rules, Class A
  • Canada ICES-003, issue 4, Class A
  • CE Mark (EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3)
  • CISPR 22, Class A

Designed  to conform to the following extended standards:

  • NOM-019
  • Argentina IEC60950-1
  • Japan VCCI, Class A
  • Australia/New Zealand AS/NZS CISPR 22, Class A
  • China CCC (GB4943), GB9254 Class A, GB17625.1
  • Taiwan BSMI CNS13438, Class A; CNS14336-1
  • Korea KN22, Class A; KN24
  • Russia/GOST ME01, IEC-60950-1, GOST R 51318.22, GOST R 51318.24, GOST R 51317.3.2,
  • GOST R 51317.3.3
  • TUV-GS (EN60950-1 /IEC60950-1,EK1-ITB2000)
Compliance RoHS 6 of 6, WEEE

Warranty Information:

One Stop Systems warrants this product to be free of defects in material and workmanship for the warranty period purchased by the customer (1 to 5 years) from OSS beginning on the date of delivery to the original purchaser from OSS . During this period, One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, except as set forth in this warranty agreement. OSS will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the OSS manufactured product. OSS is not liable for any defects in material or workmanship of any peripherals, products or parts, which OSS does not design or manufacture (third party products). OSS will honor the original manufacturer’s warranty on these products. One Stop Systems will analyze the defective component and the customer will be charged only in the following instances:

  • No problem found: $125(U.S dollars)
  • Damage Due to Negligence or Mishandling: Parts and labor at $75 per hour with a $100 minimum charge (U.S. dollars). Receipt of damaged goods voids the One Stop Systems warranty.

Repair parts and replacement products will be furnished on an exchange basis and will be either new or reconditioned. All replacement parts and products shall become the property of OSS, if such parts or products are provided under this warranty agreement. In the event a defect is not related to the OSS manufactured product or is not covered by the third party product, OSS shall repair or replace the defective parts at the purchaser’s cost and deliver the defective parts to the purchaser. This limited warranty shall not apply if the product has been misused, carelessly handled, defaced, modified or altered, or if unauthorized repairs have been attempted by others. The above warranty is the only warranty authorized by OSS and is in lieu of any implied warranties, including implied warranty of merchantability and fitness for a particular purpose. In no event will One Stop Systems be liable for any such damage as lost business, lost profits, lost savings, downtime or delay, labor, repair or material cost, injury to person or property or any similar or dissimilar consequential loss or damage incurred by the purchaser, even if OSS has been advised of the possibility of such losses or damages.

Depending on the warranty service level purchased, warranty service is obtained by advanced replacement when accompanied by a signed Warranty Service Agreement form or by delivering the product to an OSS authorized repair facility with all parts and accessories as originally shipped, along with the proof of purchase and a Returned Merchandise Authorization (RMA) number. The RMA number is obtained in advance from OSS Support or Customer Service Department and is valid for 30 days. The RMA number must be clearly marked on the exterior of the original shipping container or equivalent. Purchaser will be responsible and liable for any missing or damaged parts. Purchaser agrees to pay for shipping charges one way, and to either insure the product or assume the liability for loss or damage during transit.

Ship to: One Stop Systems

ATTENTION: RMA REPAIR DEPARTMENT

RMA####

2235 Enterprise Street, Suite 110

Escondido, CA 92029


Support: support@onestopsystems.com or 877-438-2724

Documents:

Datasheet