PCIe x16 Gen 4 Cable Adapter
PCIe x16 Gen 4 host interface board with PCIe quad SFF-8644 cable connectors as used in the PCISIG PCI Express External Cable Specification can be configured as x16, two x8, and two x4 or four x4 cable ports. The cable adapter operates in host or target mode with a DIP switch setting change.
SHIPPING AUG 2019
*Gen 4 cables are REQUIRED to support Gen 4 bandwidth and OSS Gen 4 products.
- Operates at up to 256Gb/s at PCIe Gen 4 speeds
- No driver required
- Copper and Fiber cable options up to 100m
- Half-height, half-length form factor
- Uses mini-SAS HD or CMI cables
- Operates in host or target mode
PCIe x16 Gen 4 Cable Adapter H/T
|Form Factor||PCIe 4.0 x16 half-height, half-length|
|Dimensions||6.6 x 2.65" (16.76 x 6.73 cm) at 0.063" (1.6mm) thickness|
|Connectors||• PCIe x16 card edge connector
• Quad SFF-8644 connectors on the bracket
• Compliant to PCI-SIG PCI Express External Cable Specification 3.0
Standard and low profile brackets available
Supports the following cable types:
|Cable Connection Modes||
One x16 host connection via edge card to:
|Operating Temperature||0˚C to +50˚C|
|Storage Temperature||-40˚C to 85˚C|
|Operating Humidity||10% to 90% relative humidity non-condensing|
|Storage Humidity||5% to 95% relative humidity non-condensing|
Designed to meet the following agency standards:
One Stop Systems warrants this product to be free of defects in material and workmanship for the warranty period purchased by the customer (1 to 5 years) from OSS beginning on the date of delivery to the original purchaser from OSS . During this period, One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, except as set forth in this warranty agreement. OSS will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the OSS manufactured product. OSS is not liable for any defects in material or workmanship of any peripherals, products or parts, which OSS does not design or manufacture (third party products). OSS will honor the original manufacturer’s warranty on these products. One Stop Systems will analyze the defective component and the customer will be charged only in the following instances:
- No problem found: $125(U.S dollars)
- Damage Due to Negligence or Mishandling: Parts and labor at $75 per hour with a $100 minimum charge (U.S. dollars). Receipt of damaged goods voids the One Stop Systems warranty.
Repair parts and replacement products will be furnished on an exchange basis and will be either new or reconditioned. All replacement parts and products shall become the property of OSS, if such parts or products are provided under this warranty agreement. In the event a defect is not related to the OSS manufactured product or is not covered by the third party product, OSS shall repair or replace the defective parts at the purchaser’s cost and deliver the defective parts to the purchaser. This limited warranty shall not apply if the product has been misused, carelessly handled, defaced, modified or altered, or if unauthorized repairs have been attempted by others. The above warranty is the only warranty authorized by OSS and is in lieu of any implied warranties, including implied warranty of merchantability and fitness for a particular purpose. In no event will One Stop Systems be liable for any such damage as lost business, lost profits, lost savings, downtime or delay, labor, repair or material cost, injury to person or property or any similar or dissimilar consequential loss or damage incurred by the purchaser, even if OSS has been advised of the possibility of such losses or damages.
Depending on the warranty service level purchased, warranty service is obtained by advanced replacement when accompanied by a signed Warranty Service Agreement form or by delivering the product to an OSS authorized repair facility with all parts and accessories as originally shipped, along with the proof of purchase and a Returned Merchandise Authorization (RMA) number. The RMA number is obtained in advance from OSS Support or Customer Service Department and is valid for 30 days. The RMA number must be clearly marked on the exterior of the original shipping container or equivalent. Purchaser will be responsible and liable for any missing or damaged parts. Purchaser agrees to pay for shipping charges one way, and to either insure the product or assume the liability for loss or damage during transit.
Ship to: One Stop Systems
ATTENTION: RMA REPAIR DEPARTMENT
2235 Enterprise Street, Suite 110
Escondido, CA 92029