PCIe x16 Gen3 Cable Adapter

PCIe x16 Gen3 iPass Cable Adapter

PCIe x16 Gen 3 switch-based cable adapter.

Weight: 2 lb

PCIe cable adapters install easily into a computer's PCIe slot. A PCIe cable can then be plugged into the adapter to extend the PCIe bus from the motherboard to an external device, like an expansion enclosure or storage device. The PCIe x16 Gen 3 adapter extends the PCIe bus at 120Gb/s with extremely low latency because there is no conversion software. 

The host adapter installs in the host computer’s PCIe x16 I/O slot, allowing communication between the processor and multiple I/O points


Insert the host cable adapter into a PCIe Gen3 x16 in the host system slot. Make sure that the card is well seated and tighten the screw on the face plate. Attach the cable by inserting the cable into the slot and pushing on the metal tab to raise the metal pins. Release the metal tab ones the pins are aligned with the pin holes.



PCIe x16 Gen 3 Cable Adapter H/T

Form Factor PCIe half card
Operating Temperature 0˚C to +70˚C environment
Storage Temperature -40˚C to 85˚C
Operating Humidity 10% to 90% relative humidity non-condensing
Storage Humidity 5% to 95% relative humidity non-condensing
Power 15W
Connectors • PCIe x16 cable connector
• PCIe x16 edge connector
Industry Specifications

• PCIe External Cabling Specification, Rev. 1.0
• PCI Express™ Card Electromechanical        
  Specification, Rev. 3.0
• PCI Express ® Base Specification, Rev. 3.0
• ATX Specification, Version 2.2

  • PCI Express add-in card standard
  • PCIe x16 cable
  • PCB thickness .063 +/-0.008 inch (1.6 +/- 0.2mm)
  • Mounting holes for face plate
Switch PLX 8733
Bracket • Standard and low profile brackets available
• Two LEDs on bracket
Agency Compliance

• FCC Class A
• CE
• RoHS 



Dimensional Drawing

Part Numbers:
OSS PCIe HIB38 x16
OSS PCIe HIB38 x16






Related Products